OUR PRODUCTS

BOILER TUBE

Boiler tubes need to withstand high pressure and temperature.

Simon Steel (India) distributes an extensive selection of boiler tubing used in the development of waterwalls, economizers, and superheaters. Common ASTM specifications include A213 and A210. We also carry A519 boiler tubing for mechanical and pressure applications and for transporting steam, water, and gas.

Boiler tubes need to withstand high pressure and temperature. Simon Steel state-of-the-art manufacturing processes and advanced inspection and testing procedures ensure our boiler tube stand up to the harsh environments. An experienced provider to the entire energy industry, Simon Steel (India) is a reliable source for cold drawn and hot finished boiler tubing. Simon Steel (India) has the capability and capacity to produce the size, specifications, quality and quantities you need.

BOILER TUBE IN THE FOLLOWING SPEC/GRADES:

ASTM A178 Grade A, C, D

ASTM A192

SA210 / A210 – Grade A1, C

SA213 / A213 – Grades (limited sizes) T-5, T-9, T-11, T-22, T-91

BS3059-I 320 CFS

BS3059-II 360, 440, 243, 620-460, 622-490, S1, S2, TC1, TC2

EN10216-1 P195TR1/TR2, P235TR1/TR2, P265TR1/TR2

EN10216-2 P195GH, P235GH, P265GH, TC1, TC2

DIN17175 ST35.8, ST45.8

DIN1629 ST37.0, ST44.0, ST50.0

JIS G3454 STPG370, STPG410

JIS G3461 STB340, STB410, STB440

GB5310 20G, 15MoG, 12CrMoG, 12Cr2MoG, 15CrMoG, 12Cr1MoVG, 12Cr2MoWVTiB

GB9948 10, 20, 12CrMo, 15CMo

Application: For high, middle, low pressure boiler and pressure purpose

Delivery Condition: Annealed, Normalized, Normalized and Tempered

INSPECTION AND TEST:


Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test, No-destructive Test, Hydrostatic Test.

Surface treatment: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting


Simon Steel (India) can provide a variety of boiler tubes and pressure tubes not normally found in our inventory on a direct shipment basis. ASME SA-178A and SA-214 tubing in diameters and wall thicknesses other than those listed are available. We are able to furnish ERW Air Heater Tube in both carbon steel and corten. Seamless boiler tubes can be provided in a variety of carbon and alloy specifications including SA-192, SA-209, SA-210, and SA-213.


Length: 25 meters maximum, we advice 11.8 meters max.

Surface condition: bright annealed and pickled

Packing: plastic pipe cap, plastic bag and steel strips bundled

Delivery Conditions: Annealed, Normalized, Normalized and Tempered


READ MORE:


Boiler pipe refers to one of the seamless steel pipes. The method of manufacturing boiler tube is the same with seamless steel pipe,but this pipe has a requirement of the steel grades. Depending on the operating temperature, it can be divided into two kinds: general boiler pipes and high-pressure boiler pipes.

A general boiler pipe is able to work below the temperature 450°C.It’s made of hot finished or cold rolled carbon steel pipes. While high-pressure boiler tube is used to produce high-pressure or ultrahigh pressure super heater tube,reheater tube,gas-guide tube,main steam pipe and so on. Our product BS3059-II 360 10, BS3059-II440 belongs to this boiler tube.


METHOD OF MANUFACTURE OF TUBE AND REFERCEN


HFS: Hot finished seamless

CFS: Cold finished seamless

ERW: Electric resistance welded including induction welded

CEW: Cold finished electric resistance welded including induction welded


CONTACT US

Simon Steels © copyright All rights reserved

Website Designed & Developed By dubaiyellowpagesonline.com